Operating Heavy Machinery: 7 Best Practices to Ensure Drum Jack Driving Safety

Handling, lifting, and moving drums using a drum jack in a warehouse is extensive and challenging work, not to mention that it can be dangerous. Just a single mistake can lead to the worker suffering from strained muscles, damaged knees, injured backs, abdominal hernias, and even exposure to spilled hazardous substances. That is why there are standard precautions that you should follow to avoid injuries.

Here are tips when handling drums using such piece of equipment:

1. Identify all the safety risks

Drums, especially those that are loaded, are too heavy for you to handle manually, with contents shifting from one direction to another. If you are dealing with flexible plastic drums, they are even more difficult to grip, so make sure you use the appropriate handling equipment.

2. Never roll the drum on or off

While you have heard of drums being rolled on and off in warehouses in the past, you should never try this outdated method today. When you turn drums on their sides and roll them, chances are they would drop, crushing your hands or feet, causing serious injuries. So, always use modern drum jacks and lifting equipment to drastically reduce the risks of these accidents happening.

3. Always secure the drums

Before you lift and move the drums, make sure that they are properly secured on the equipment. Remember that their shapes make them less stable than square containers, so they would fall down easily. If this happens, they would put workers at risk of getting injured. Visit at TEN The Energy Network

4. Inspect the pallets that you are going to use

Aside from the Australian drum jack and lifting equipment that you might have, you should also inspect your pallets, as these are the main source of the drums’ stability when they are being moved. Check if there are cracks or chips on them, as these little impairments will significantly undermine safety levels.

5. Consider the drum’s content

What you fill your drums with can vary, though you still have to take note of them at all times. Especially when your drums contain corrosive or flammable liquids or other hazardous substances, you should take necessary steps to prevent leaks and spills. For example, you can clearly label your drums according to content and ensure everyone is aware of it.

6. Never overload the jack

Remember that each drum handling equipment is designed to specific standards with engineered safety factors, and by exceeding their rated capacity, you are risking your safety and other workers around. On a similar note, these machines also have a specific job to perform, so do not alter their function to avoid injuries to the operators.

7. Always wear protective clothing

To ensure a higher level of safety when lifting and moving drums, you should make sure you wear proper protective clothing, especially when you are dealing with hazardous materials. These include overalls, gloves, eye protection, and steel-toed shoes.

Sure enough, mishandling heavy drums could not only lead to damages but could also cause serious injuries, which is why you should take proper safety precautions when lifting and moving them. Now, for the best drum jack Australia can offer you, you can visit https://www.tengroup.com.au/products/SPP-DJ-3T

Leave a Comment

All fields are required. Your email address will not be published.